FCL-25TS

Manufacturer:	FORCE ONE
Turning diameter:	470 mm
Turning length:	470 mm
Chuck diameter:	254/210 mm
Max spindle speed:	3500/4200 rpm
Spindle power:	11/15 kW

Machine description
Technical details
Scope of Supply

The bed is inclined at 45 degrees.

Long-path guideways (LM) for the X and Z axes, and sliding guideways for the B axis.

The TS series of machines denotes the presence of a counter spindle.

The spindle axes are horizontal. Synchronous rotation of both spindles allows for machining a part in a single setup.

Model:	FCL-15TS		FCL-20TS			FCL-25TS
Number of Axis	3 (5)		3 (5)			3 (5)
Turning diameter over bed, mm	600		630			650
Turning diameter, mm	250		490			470
Turning length, mm	260		500			470
Spindle:
Spindle nose, ASA	L: ASA A2-5 R: ASA A2-5		L: ASA A2-6 R: ASA A2-5			L: ASA A2-8 R: ASA A2-6
Spindle diameter in front bearing, mm	56	56	61		56	90		61
Maximum bar diameter in spindle, mm	45	45	52		45	77		52
Spindle speed, rpm	10–6000	10–6000	10–4200		10–6000	10–3500		10–4200
Tool rotation speed (optional), rpm	25–4000		25–4000			25–4000
Diameter of lathe chuck, mm	169	169	210	169		254	210
Turret:
Type	Hydraulic LS-200-12T (Option Servo LS-200-12T)		Hydraulic LS-240-12T (Option Servo LS-240-12T)			Hydraulic LS-240-12T (Option Servo LS-240-12T)
Radial tool holder cross-section size, mm	20×20		20×20			20×25
Radial tool holder cross-section size, mm	32		32			40
Tools	12		12			12
Traverses:
X-axis, mm	165		280			280
Z-axis, mm	310		560			540
B-axis, mm	260		500			470
C-axis, deg	360 (0,001)		360 (0,001)			360 (0,001)
Rapid movement along the X/Z/B axes, m/min	30/30/20		30/30/20			30/30/20
Feed speed, mm/rev	0,001-500		0,001-500			0,001-500
Motors:
Main spindle, kW	5,5/7,5		9/11			11/15
Sub spindle, kW	5,5/7,5		5,5/7,5			7,5/11
X/Z/B axis drive power, kW	1,6/1,6/1,6		1,6/1,6/1,6			3/3/1,6
Hydraulic oil pump, kW	1,5		1,5			1,5
Coolant pump, kW	0,75		0,75			0,75
Machine dimensions:
Length x Width, mm	3750×2000		4150×2100			4150×2100
Height, mm	2000		2100			2100
Weight (with chip conveyor), kg	5280/5830		6440/7030			6630/7280

Standard equipment:

Coolant station (3 atm);
Coolant tank (100 l);
12-position turret;
Automatic lubrication system;
Toolbox;
Work table illumination;
Emergency signal;
Hydraulic power unit;
Electrical cabinet heat exchanger;
Chip conveyor.

Additional options:

Optical-electronic axis position sensors;
Automatic tool setting system;
Manual tool setting system;
Transformer;
Door interlock system;
Finished parts receiving device;
Automatic bar feeder;
Servo-driven turret;
Cutoff sensor.